The UV500 can measure organic matter, nitrate, colour, turbidity, phosphate, ammonia and hydrogen sulphide. A complementary UV-visible fluorescence module allows the measurement of aromatics hydrocarbons.

Nephelometric turbidity by visible or infra-red laser diode is also available.

External probes can be added for physicochemical parameters like pH, ORP, dissolved oxygen, conductivity and turbidity.

Extremely long life time lamp, the maintenance is roughly limited to the periodic refill of the inexpensive cleaning solution and eventually reagents depending on the parameters.

The color touch screen and its intuitive operating interface make the use of the instrument easier and more friendly

Compact and simple, up to 16 parameters can be measured on one instrument

Fast measurement, except for ammonia nitrogen, sulfide and phosphate, the measurement time of other parameters is less than 10 seconds

No blockage, the instrument integrates two cleaning systems, one is an ultrasonic cleaning flow cell system, the other is a 5% dilute sulfuric acid cleaning system, cleaning water circuit and flow cell

Low maintenance, the enclosure protection level is IP65, the installation method is wall-mounted, it can be directly installed outdoors, dustproof and waterproof, can withstand harsh weather, and can operate independently and automatically on site for more than a few weeks without human intervention

The multi-channel water sample system can realize the measurement of up to 6 channels of water samples. By selecting 6 relay modules, the external solenoid valve or sampling pump of each channel of water samples can be sampled and controlled.

After setting the threshold, the instrument can realize the upper and lower limit alarm, and also can realize the fault alarm, and the alarm signal is the switch signal.

The 4-20mA output module can convert the measured value of a single parameter into a current signal in real time. The current value between 4-20mA is proportional to the measured value

When the water sample to be tested does not have enough pressure, an automatic sampling peristaltic pump is required. The automatic sampling peristaltic pump is installed outside the instrument case and can directly draw water samples from rivers, pools or pipeline systems. Sampling peristaltic pump head is 5M

In order to prevent the sampling pipeline from freezing in winter, a heating pipeline can be prepared around the water channel. The heater in the UV500 case ensures that the temperature of the water channel is above the freezing point.

Two transmission modes: MODBUS mode and NETSCAN software (provided by Tethys). Through these transmission methods, users can diagnose, track and download UV500 measurement data in the office. WIFI module, ETHERNET module, GSM module or telephone MODEM can be selected as required for long-distance transmission

In some applications requiring explosion protection, the user can install the UV500 in an optional explosion-proof enclosure